Aftermarket Performance Parts Retailer

K&N Air Intake 2011-2012 Dodge Durango and Jeep Grand Cherokee 3.6 V6

Built for performance and show, this K&N Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.

K&N Intake kits are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles).

Put all this together and you have the best high-flow intake system available today.

The part number for this item is 77-1563KP and it fits 2011-2012 Dodge Durango and Jeep Grand Cherokee 3.6 V6 models.

This item comes with a Lifetime Warranty.

Click to Purchase

These cold air intakes are not typical cold air intakes. They were designed with AEM’s electronically Tuned Intake (ETI) technology. These intakes were designed with AEM’s ETI module which electronically adjusts the tC’s MAF sensor to properly read air density. The result is an intake system that works with factory electronics and provides large horsepower and torque gains.

For years AEM has been at the forefront of the Lexus aftermarket scene, making quality air intake systems for Lexus vehicles. AEM Lexus air intake systems offer increases in both horsepower and torque, as well as offer improvements in engine efficiency and fuel economy. Each AEM Lexus air intake system is designed vehicle specific, meaning it will bolt right into your Lexus , requiring no additional modifications or parts. You can install an AEM air intake system onto an Lexus that has never been modified without needing to do anything else.

AEM Lexus Air Intake Systems also will NOT void your Lexus warranty when installed correctly. AEM makes air intake systems for cars, trucks and suvs. AEM air intake systems feature AEM DryFlow air filters that are maintenance free, requiring no oil! The AEM DryFlow air filter also is 99.52% efficient, exceeding the filtration rate of most of the competition and keeping your engine cleaner.

Now that you know the facts about our AEM air intake systems, isn’t it time to bring your Lexus up to its potential? If you’re not using an AEM intake, your Lexus may be moving, but it could be moving faster.

The part number for this item is 41-1406P or 41-1406C (Depending on your color choice) and it fits 2006-2010 Lexus IS250 2.5 V6 models.

Both of these AEM air intake systems fit the following models:
2010 Lexus IS250 2.5L V6
2009 Lexus IS250 2.5L V6
2008 Lexus IS250 2.5L V6
2007 Lexus IS250 2.5L V6
2006 Lexus IS250 2.5L V6

Click here for more information and to purchase the AEM Shorty Intake

There are several brands out there when it comes to aftermarket air intake systems, but Injen leads the way in innovation, efficiency, and power gains. Injen Cold Air Intake Systems are more than just a high flow air filter on a less restrictive tube. Featuring Injen’s patented MR Technology, Injen incorporates a step process into their intake tubes (meaning they increase or decrease the diameter of the intake tube at strategic points to control airflow). This, coupled with the fact that Injen Injen Air Intakes incorporate your existing sensors, mean you won’t have any check engine lights and it is safe for use on your vehicle. This “Factory Tuned” design means you won’t need any tuning and makes this truly a bolt on system.

At the end of the Injen Intake is the Injen High Flow Air Filter Element, which is relocated to an area behind your bumper and inner wheel well fender. This strategic placement allows you to obtain colder air while still having the air filter protected from the elements. The Injen air filter that can be cleaned and reused for as long as you own the vehicle. An incorporated velocity stack smooths out airflow to help maximize power gains. Comprehensive installation instructions including photos make installation of your new Injen Intake easy enough to do yourself with basic hand tools in a couple of hours or less. Everything you need to install this air intake is included and the intake comes with a lifetime warranty.

Injen Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number on this item is SP6069P (or SP6069BLK) and it fits 2010-2011 Mazda 6 3.7 V6 models. This cold air intake can be converted to a short ram intake if desired (instructions included).

For more information and to buy click here from MPCustoms