Aftermarket Performance Parts Retailer

Click here for pricing

Cold air intake systems aren’t created equal and savvy customers know it. This is why Volant Intakes are so popular with customers who know their air intakes. What makes Volant Cold Air Intakes different? First, Volant eliminates your restrictive factory airbox, filter, and intake tube. In its place goes the Volant Power Box. This box houses a high flow Volant Air Filter that is cleanable and reusable for as long as you own your vehicle. This superior design protects the filter and ensures that colder air is pulled instead of hotter (less dense) air from the engine bay, resulting in more horsepower and torque. Connected to the box is the Volant Ram Air Scoop, which turns your intake system into a functional ram air system to maximize horsepower and mileage gains, especially at higher speeds. Being an enclosed system, it keeps your engine quiet at cruising speeds, but allows it to still roar to life when you stomp the gas.

This, coupled with the fact that Volant Cold Air Intakes incorporate your existing sensors, mean you won’t have any check engine lights and they are safe for use on your vehicle. This “Factory Tuned” design means you won’t need any tuning and makes this truly a bolt on system. Everything you need to install the unit comes with your Volant Cold Air Intake and you’ll be able to install it with basic hand tools in an hour or less. Volant Intakes all are backed by a lifetime warranty.

Volant Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number for this Volant Complete Ram Air Intake System is 3285661 and it fits 2004-2011 Nissan Titan, Armada 5.6 V8 models.

To purchase click here Volant PowerCore 

The stylish Scion tC has been attracting the attention of drivers since its introduction in 2005. Any driver looking for a compact car with good fuel mileage and stylish interior that is packed with an abundance of features should look into the Scion tC. The newer models from 2008 to 2011 have brought some needed improvements in the exterior and interior design. The addition of the iPod interface was also a nice touch. Although the Scion tC is a great buy for your money, the 2.4 liter four-cylinder engine is not very powerful. The new 2.5 is a vast improvement for 2011 and the AEM Tuned Cold Air Intake improves it even more.

To increase the power and performance in your 2011 Scion tC, AEM has released a cold air intake system (41-1405) that will fit the tight engine compartment of your vehicle. The 41-1405 is not a typical cold air intake. It was designed with AEM’s Electronically Tuned Intake (ETI) technology.

This cold air intake incorporates AEM’s ETI module which electronically adjusts the tC’s MAF sensor to properly read air density. The result is an intake system that works with factory electronics and provides large horsepower and torque gains. The 41-1401C completely replaces the Scion tC’s restrictive factory intake system with a gunmetal gray or mirror polished aluminum cold air intake. This cold air intake connects at the engine throttle body and places the air filter at the driver side wheel well. This ensures the delivery of cooler outside air to the engine.

The 41-1405 uses a DryFlow air filter, part 21-202DK, which comes with your intake system. AEM’s oil-free DRYFLOW air filter is extremely durable and easy to clean. AEM intakes feature a high-polished finish for that show-quality look, and include all necessary hoses, bracket systems, and easy to follow instructions.

The part number for this item is 41-1405P or 41-1405C (Depending on your color choice) and it fits 2011-2012 Scion tC 2.5 models.

For more information or to buy click here  AEM Tuned Cold Air Intake 2011-2012 Scion tC 2.5

There are several brands out there when it comes to aftermarket air intake systems, but Injen leads the way in innovation, efficiency, and power gains. Injen Cold Air Intake Systems are more than just a high flow air filter on a less restrictive tube. Featuring Injen’s patented MR Technology, Injen incorporates a step process into their intake tubes (meaning they increase or decrease the diameter of the intake tube at strategic points to control airflow). This, coupled with the fact that Injen Injen Air Intakes incorporate your existing sensors, mean you won’t have any check engine lights and it is safe for use on your vehicle. This “Factory Tuned” design means you won’t need any tuning and makes this truly a bolt on system.

At the end of the Injen Intake is the Injen High Flow Air Filter Element, which is relocated to an area behind your bumper and inner wheel well fender. This strategic placement allows you to obtain colder air while still having the air filter protected from the elements. The Injen air filter that can be cleaned and reused for as long as you own the vehicle. An incorporated velocity stack smooths out airflow to help maximize power gains. Comprehensive installation instructions including photos make installation of your new Injen Intake easy enough to do yourself with basic hand tools in a couple of hours or less. Everything you need to install this air intake is included and the intake comes with a lifetime warranty.

Injen Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number for this item from MPCustoms is SP1340P or SP1340BLK (depending on which color you choose) and it fits 2012 Hyundai Veloster 1.6 models

For more information and to buy click here from MPCustoms

Cold air intake systems aren’t created equal and savvy customers know it. This is why Volant Intakes are so popular with customers who know their air intakes. What makes Volant Cold Air Intakes different? First, Volant eliminates your restrictive factory airbox, filter, and intake tube. In its place goes the Volant Power Box. This box houses a high flow Volant PowerCore Air Filter that is dry and maintenance free for 100,000 miles. This revolutionary air filter does not require any oiling and offers superior filtration. The superior design of the Volant Intake Box protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay, resulting in more horsepower and torque. Being an enclosed system, it keeps your engine quiet at cruising speeds, but allows it to still roar to life when you stomp the gas.

This, coupled with the fact that Volant Cold Air Intakes incorporate your existing sensors, mean you won’t have any check engine lights and they are safe for use on your vehicle. This “Factory Tuned” design means you won’t need any tuning and makes this truly a bolt on system. Everything you need to install the unit comes with your Volant Cold Air Intake and you’ll be able to install it with basic hand tools in an hour or less. Volant Intakes all are backed by a lifetime warranty.

Volant Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number for this item is 198506 and it fits 2011-2012 Ford F150 5.0 models.

For more information and to purchase click here