For years AEM has been at the forefront of the Lexus aftermarket scene, making quality air intake systems for Lexus vehicles. AEM Lexus air intake systems offer increases in both horsepower and torque, as well as offer improvements in engine efficiency and fuel economy. Each AEM Lexus air intake system is designed vehicle specific, meaning it will bolt right into your Lexus , requiring no additional modifications or parts. You can install an AEM air intake system onto an Lexus that has never been modified without needing to do anything else.

AEM Lexus Air Intake Systems also will NOT void your Lexus warranty when installed correctly. AEM makes air intake systems for cars, trucks and suvs. AEM air intake systems feature AEM DryFlow air filters that are maintenance free, requiring no oil! The AEM DryFlow air filter also is 99.52% efficient, exceeding the filtration rate of most of the competition and keeping your engine cleaner.

Now that you know the facts about our AEM air intake systems, isn’t it time to bring your Lexus up to its potential? If you’re not using an AEM intake, your Lexus may be moving, but it could be moving faster.

The part number for this item is 41-1406P or 41-1406C (Depending on your color choice) and it fits 2006-2010 Lexus IS250 2.5 V6 models.

Both of these AEM air intake systems fit the following models:
2010 Lexus IS250 2.5L V6
2009 Lexus IS250 2.5L V6
2008 Lexus IS250 2.5L V6
2007 Lexus IS250 2.5L V6
2006 Lexus IS250 2.5L V6

Click here for more information and to purchase the AEM Shorty Intake

This flipping truck bed extender takes about an hour to install and you’ll need to drill a couple of simple holes for the brackets that the Bed X-Tender HD hooks into. The installation is not complicated and most people without automotive knowledge can successfully complete the installation quickly and easily.

The Bed X-Tender HD is available in your choice of a powder coated Silver or Black that is built to withstand the toughest elements. Crafted in the USA and backed by a 3-year/36,000 mile warranty, it’s incredibly light weight, yet strong enough for the average person to sit on.

Your new Flipping Bed Extender HD will come with everything all parts needed to install it on your truck when bought from MPCustoms. The part number for this item is 74803-00A or 74803-01A (depending on your color choice) and it fits 2007-2012 Toyota Tundra models.

Click to Order

2007-2012 Chevy Silverado GMC Sierra Standard Bed Flipping Bed X-Tender HD by AMP Research 74805-00

The Bed X-Tender HD Flipping Bed Extender by Amp Research is probably the most useful accessory you’ll by for your truck. Chances are you’ve seen one on a friend or co-workers truck. This new version of the Bed X-tender is heavier duty and easier to assemble and install than the original Bed X-Tender. The Patented rounded rectangle tubes are more durable and don’t ding and dent like the cheaper knock-offs. The Bed X-Tender HD instantly adds 2 feet of usable length to your truck bed. When you don’t need the extra length, the Bed X-Tender HD effortlessly flips forward into the bed of the truck giving you a protected area to put groceries, tools, or anything else you don’t want sliding around in the rest of the truck bed. Attached nylon straps hold the bed extender down when “flipped out”.

This flipping truck bed extender takes about an hour to install and you’ll need to drill a couple of simple holes for the brackets that the Bed X-Tender HD hooks into. The installation is not complicated and most people without automotive knowledge can successfully complete the installation quickly and easily.

The Bed X-Tender HD is available in your choice of a powder coated Silver or Black that is built to withstand the toughest elements. Crafted in the USA and backed by a 3-year/36,000 mile warranty, it’s incredibly light weight, yet strong enough for the average person to sit on.

Your new Flipping Bed Extender HD will come with everything all parts needed to install it on your truck when ordered from MPCustoms.

The part number for this item is 74805-00A or 74805-01A (depending on your color choice) and it fits 2007-2012 Chevy Silverado GMC Sierra Standard Bed models.

Click to Order

Pickup beds are getting taller and taller and it has gotten harder and harder to reach into the bed of the truck. If you’re nodding your head right now, you’ll love the BedStep 2 Truck Bed Side Step by AMP Research! This simple and effective step allows you to access your pickup bed FROM THE SIDE OF THE TRUCK safely, securely and conveniently, no matter what you’re hauling. Its ingenious frame mounting gives you easy access to the front of your truck bed. The AMP Research BedStep 2 is designed to hide under your truck when driving, for improved aerodynamics, ground clearance, and good looks. Then, when you need it, it flips down with an easy push from your foot, extending out and back to give you a solid, secure step. It hides away just as easily.

Installation is fast and easy and does not require any drilling! Expect to spend about 30 minutes installing your new BedStep 2 Truck Bed Side Step.

Click here to Shop

BED STEP 2 for Dodge

Cold air intake systems aren’t created equal and savvy customers know it. This is why Volant Intakes are so popular with customers who know their air intakes. What makes Volant Cold Air Intakes different? First, Volant eliminates your restrictive factory airbox, filter, and intake tube. In its place goes the Volant Power Box. This box houses a high flow Volant Air Filter that is cleanable and reusable for as long as you own your vehicle. This superior design protects the filter and ensures that colder air is pulled instead of hotter (less dense) air from the engine bay, resulting in more horsepower and torque. Connected to the box is the Volant Ram Air Scoop, which turns your intake system into a functional ram air system to maximize horsepower and mileage gains, especially at higher speeds. Being an enclosed system, it keeps your engine quiet at cruising speeds, but allows it to still roar to life when you stomp the gas.

This, coupled with the fact that Volant Cold Air Intakes incorporate your existing sensors, mean you won’t have any check engine lights and they are safe for use on your vehicle. This “Factory Tuned” design means you won’t need any tuning and makes this truly a bolt on system. Everything you need to install the unit comes with your Volant Cold Air Intake and you’ll be able to install it with basic hand tools in an hour or less. Volant Intakes all are backed by a lifetime warranty.

Volant Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number for this Volant Complete Ram Air Intake System is 3285661 and it fits 2004-2011 Nissan Titan, Armada 5.6 V8 models.

To purchase click here Volant PowerCore 

To increase the power and performance in your 2011 Scion tC, AEM has released a cold air intake system (41-1405) that will fit the tight engine compartment of your vehicle. The 41-1405 is not a typical cold air intake. It was designed with AEM’s Electronically Tuned Intake (ETI) technology.

This cold air intake incorporates AEM’s ETI module which electronically adjusts the tC’s MAF sensor to properly read air density. The result is an intake system that works with factory electronics and provides large horsepower and torque gains. The 41-1401C completely replaces the Scion tC’s restrictive factory intake system with a gunmetal gray or mirror polished aluminum cold air intake. This cold air intake connects at the engine throttle body and places the air filter at the driver side wheel well. This ensures the delivery of cooler outside air to the engine.

The 41-1405 uses a DryFlow air filter, part 21-202DK, which comes with your intake system. AEM’s oil-free DRYFLOW air filter is extremely durable and easy to clean. AEM intakes feature a high-polished finish for that show-quality look, and include all necessary hoses, bracket systems, and easy to follow instructions.

The part number for this item is 41-1405P or 41-1405C (Depending on your color choice) and it fits 2011-2012 Scion tC 2.5 models.

For more information or to buy click here  AEM Tuned Cold Air Intake 2011-2012 Scion tC 2.5

At the end of the Injen Intake is the Injen High Flow Air Filter Element, which is relocated to an area behind your bumper and inner wheel well fender. This strategic placement allows you to obtain colder air while still having the air filter protected from the elements. The Injen air filter that can be cleaned and reused for as long as you own the vehicle. An incorporated velocity stack smooths out airflow to help maximize power gains. Comprehensive installation instructions including photos make installation of your new Injen Intake easy enough to do yourself with basic hand tools in a couple of hours or less. Everything you need to install this air intake is included and the intake comes with a lifetime warranty.

Injen Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number for this item from MPCustoms is SP1340P or SP1340BLK (depending on which color you choose) and it fits 2012 Hyundai Veloster 1.6 models

For more information and to buy click here from MPCustoms

This, coupled with the fact that Volant Cold Air Intakes incorporate your existing sensors, mean you won’t have any check engine lights and they are safe for use on your vehicle. This “Factory Tuned” design means you won’t need any tuning and makes this truly a bolt on system. Everything you need to install the unit comes with your Volant Cold Air Intake and you’ll be able to install it with basic hand tools in an hour or less. Volant Intakes all are backed by a lifetime warranty.

Volant Cold Air Intake Systems exceed OE standards and as a result will not void any existing factory warranties that you may have. Additionally, you’ll enjoy increased horsepower and torque, as well as improved throttle response. Fuel economy gains, especially during freeway conditions, are commonly achieved helping the unit to pay for itself over time.

The part number for this item is 198506 and it fits 2011-2012 Ford F150 5.0 models.

For more information and to purchase click here

So you’ve got one of the new Nissan GTRs… Pretty darn fast. Now it is time to take your Nissan GTR ‘s air intake system to the next level. Get rid of those boring restrictive air boxes and replace them with the Injen SP1995 Nissan 350z short ram air intake system! You’ll get two top of the line replacement air intake systems complete with new high performance upper intercooler piping for more power, more torque, and a great look!

This Injen Air Intake System is a traditional, underhood intake system that is placed in the stock location of the factory airbox system. If you have air flow sensor(s) on your factory intake, don’t worry! Existing sensors will bolt directly to your new Injen intake system. Backed by Injen’s lifetime warranty.

What Makes Injen Intakes better than their competition? Not only are all Injen Technology Intakes made in the USA, Injen cool air intake systems feature MR Technology, developed by Injen to maintain safe air/fuel ratio and highly efficient tuning. Injen also does extensive dyno tuning and r&d before releasing an intake, unlike many other companies who take an “if it fits, use it” attitude to aftermarket intakes.

Each system is built from 6061 T-6 aluminum alloy to ensure the lightest design possible.

The Part number for this item is: SP1995 and it fits 2010-2012 Nissan GTR 3.8 Twin Turbo V6 (Includes Upper Intercooler Piping).

For more infrmation and to shop and buy from MPCustoms click here